• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Pellet Stove Furnace

Pellet stoves can be used pellet stoves for sale as a second heating source or, with proper venting, a primary heating option. They are available as freestanding models or as fireplace inserts. They can give the appearance of a traditional wood-burning fireplace.

The auger moves the pellets out of the hopper into the combustion chamber, where they are burnt and produce heat. Sensors detect the fire and adjust the speed of operation to keep the desired temperature of the room.

1. Energy Efficiency

Pellet stoves burn a sustainable non-toxic fuel composed of compressed sawdust wood chips, bark and other materials normally put in landfills, but can be repurposed into a clean and efficient source of heating. This means that they help homeowners lower their energy use and lower greenhouse gas emissions. Many pellet stove users report that they have recouped their initial investment in just few years by reducing their heating costs.

Pellets are extremely compressed and are more dense than natural wood, making them more efficient to burn. They also produce less creosote buildup than traditional fireplaces that burn wood. Additionally, they are packed in plastic bags to seal out moisture and need less frequent cleaning.

Pellet stoves, just like other heating systems, must be properly sized and vented. A qualified technician can assess your space and venting requirements to ensure the best results.

When the hearth is installed, it is built to size and the vent is fitted through a hole that has been cut in your home's siding. The vent can be run out either a side wall or the roof, based on your preference and the local regulations.

After the hearth and vent are completed, the pellet stove can be connected and turned on. Certain manufacturers provide remote controls that make starting and maintaining the fire easy and others include sensors that monitor airflow, combustion, flue temperature, and pressure. If the system is able to determine that it needs more pellets or less, it sends a signal to the auger to speed up or slow it down accordingly.

All stoves come with a storage hopper which can hold between 35 and 130 pounds of pellets. Hopper capacities determine how often the stove needs to be refilled and larger hoppers allow for longer periods between refills. A grille draws fresh air from the room and then passes it over an exchanger that then is able to blow heated air into the living area through convection. A auger, grate or any other device distributes pellets and a pan beneath collects any unburned ones and also any combustion leftovers.

Pellet stoves are more efficient in energy use than wood-burning models but not as efficient as electric heaters or natural gas furnaces. Electric components that drive motorized components of the stoves require a power source. This could cause an issue in the event of a power outage, but backup systems such as generators and batteries are readily available.

2. Low Maintenance

Pellet stoves are extremely efficient, but they require some attention to operate properly. Cleaning your stove and its exhaust vent on a regular basis will help prevent the accumulation of harmful creosote. This could cause a fire or explosion that can damage your stove or even your home.

A pellet stove burns natural wood pellets or other materials (like nutshells, corn kernels or small pieces of wood scraps). An electric auger feeds the pellets from a fuel container into the burner and into the combustion chamber. The speed at which pellets are pumped into the burner is controlled by the thermostat you set. This allows the fire to keep roaring or lower or even shut down according to the temperature you set. When the fire is gone the ash is thrown into an empty ash tin beneath the burner. It can then be easily removed and then disposed of.

Pellets are produced from the byproducts of wood processing that could otherwise be thrown away. They are renewable resources and release far less particulates into the air than traditional wood-burning stoves, making them a cleaner burning heat source. The amount of carcinogens, carbon monoxide and other harmful chemicals released from pellet stoves is much lower than the newer EPA certified wood stoves.

These appliances are not required to be vented via chimneys, as is the case with traditional wood stoves. Instead, they should be vented via a wall, or other structure outside. Pellet stoves come with flue ports at the front or back of the appliance. They are connected to a ventpipe that extends out the house.

One disadvantage of pellet stoves is that you need to purchase or store enough pellets to last through the winter time. Pellet stove owners typically use three tons of wood pellets per winter, at a cost of $200 per ton. The cost can be high however they are much less expensive than buying firewood and hauling it for a fireplace or wood-burning stove. Be sure to purchase enough pellets to ensure that your stove will last through the coldest winter months, and that you have a suitable place to store them (preferably cool, dry and away from the ground).

3. Reduced Carbon Footprint

pellet stoves best stoves make use of renewable biomass fuels to generate heat, thus reducing the dependence on fossil fuels that are depleted. This contributes to a reduced carbon footprint and also helps diversify the energy sources used in homes.

Even the most modern woodstoves that are EPA certified emit considerably less carbon dioxide than pellet stoves. The emissions of pellet stoves are also significantly less than those from gas furnaces. Pellets are made up of compressed sawdust, bark, and other lumber leftovers and may also contain different materials including corn, soybeans, nutshells, cherry pits, and agricultural waste. When they are burned, they release fewer particulates (leading to respiratory problems and allergies), carcinogens, carbon monoxide, and nitrogen oxides.

The major difference between the wood stove and the pellet stove is the feed system. Pellet stoves have hoppers to store the pellets. When the thermostat or sensors suggest that the room needs heating, the auger is turned. The pellets are then placed in the combustion chamber, where they burn to produce heat. The air from the combustion chamber moves through a heat exchanger which transfers the heat to the blower before releasing it into the room. This process produces very low emissions, and creosote does not created.

After the hopper is empty, the ash is removed by a cyclone, and is deposited in an ash bin. The stove is equipped with a fan that circulates the warm, fresh air into the room. The majority of pellet stoves are made to operate with minimal maintenance and have a large viewing space for you and your family members to enjoy the flames.

The quality of pellets is the main factor that affects the emissions from pellet stoves. Poor-quality pellets will produce more emissions. When choosing your pellets, make sure they're certified to meet certain standards and don't contain other ingredients, such as petroleum products or urea. Choose a company that has a guarantee and will replace or repair parts in the event of a problem. If you're looking to take the greener route certain states allow homeowners to get a tax credit when installing pellet stoves. This is a great option to help offset the initial cost of this type stove and makes installation more affordable.

4. Reduced Noise

pellet stoves dealers near me stoves produce less smoke and exhaust when compared to wood burning fireplaces. A fan is used to spread heat more evenly across the room. This feature is one reason pellet stoves need less maintenance than wood stoves. While wood stoves must be frequently cleaned of chemicals and particulates pellet stoves need a specialized metal vacuum cleaner for routine cleaning.

Many manufacturers have made a conscious effort to design their stoves to be simple to set up and operate as well as maintain. They are available in various styles that complement the design of your home. Some even come with a programmable thermostat remote control, as well as WIFI applications that allow you to manage and monitor your stove from any location in the world.

Most pellet stoves have a large fuel hopper that can accommodate between 35 and 130 pounds of pellets. The pellets are then pumped into the combustion chamber by an auger. The amount of heat produced and the level at which the fire gets depends on the speed at which pellets are fed into the burner. The hopper can be filled with hardwood pellets (from dense wood species such as oak and hickory) or softwood pellets (from pine and fir). A lot of stoves can burn biomass pellets made from corn and switchgrass. This is a green alternative.

Since ducted pellet stove stoves burn as a clean fuel, they produce far less smoke than conventional wood-burning fireplaces, and require less maintenance. They do not need chimneys, making them the best option for retrofits or new construction.

In contrast to wood stoves, which require regular maintenance to be free of creosote as well as other chemicals, pellet stoves only need to be periodically inspected to ensure proper operation and maintenance. Based on the model, this might include regular inspections and cleaning of the accumulation of the ash or "clinker," as well as the motor and fans. Your appliance dealer can explain the correct procedures for your specific brand and model. He can also assist you to determine the right fuel for your stove and provide details on storage and safety.